Karanovic Research

Firmware flasher

OpenFAN Micro

Tiny USB-powered WiFi fan controller for 5V and 12V PWM fans.

This page only installs OpenFAN Micro firmware. Read the OpenFAN Micro firmware guide.

1Choose firmware

All published builds are listed in builds.json.

2Put your OpenFAN Micro in bootloader mode

  1. Disconnect the fan from the board.
  2. Press and hold the BOOT button on the OpenFAN Micro.
  3. While holding BOOT, connect the USB-C cable to your computer.
  4. Only the red power LED should be on. Your computer now shows a new serial (COM) port.

3Connect and install

Before you flash
  • Flashing erases all settings (WiFi, fan settings, device name). You will need to set the device up again.
This browser can't flash firmware. Open this page in Google Chrome or Microsoft Edge on a desktop computer.
Flashing needs a secure (HTTPS) connection.

Your browser will ask you to pick the serial port of your OpenFAN Micro.