Skip to content

OpenFAN API Documentation

OpenFAN provides an API that allows you to interact with it remotely or integrate OpenFAN into another system.

You can use this for example to monitor/log the fan RPM, or to apply different FAN profiles based on system temperature/load etc. You could also use it for detection of stalled/blocked fans or to coordinate multiple OpenFan instances.

Configuration

The API server runs on port 3000 and accepts HTTP GET/POST requests.
In order to send requests and read responses, you will use the machine IP address. If the API server is running on the locally, you can access it via localhost or 127.0.0.1.

Assuming you are running OpenFAN locally, the base API URL can be accessed at http://localhost:3000/api/v0 and at the same time you would be able to access the GUI interface via your web-browser on http://localhost:3000.

The OpenAPI server will serve both the API and the GUI at the same time.

config.yaml

If port 3000 is already in use or you wish to use a different port, you can change it in the config.yaml file.

Access remotely over network

If you are accessing/controlling a remote OpenFAN, you would use the IP address of the remote machine on which OpenFAN is running. For example if you want to access OpenFAN API on a networked machine that has IP address 192.168.0.55 you would use http://192.168.0.55:3000/api/v0 as the API base URL and http://192.168.0.55:3000 to access the GUI interface.

Security!

OpenFAN API does NOT use any encryption or authentication. So make sure that you limit access to the API via your firewall .

Messaging

All transactions begin with the client sending a HTTP/GET or HTTP/POST request to the OpenFAN API server.

All responses from the server are JSON formatted and always contain three keys: status, message and data. Although they can be empty/null if they should be ignored (ie. there is an error, status and message keys will be populated but data will be null).

Response always has the following structure:

{
    "status": "...",
    "message": "...",
    "data": { }
}

Fan Status - /api/v0/fan/status

Use this function to get fan status (RPM values) from the server.

Example: Get RPM of all fans

GET - http://localhost:3000/api/v0/fan/status

Response format (JSON)

{
    "status": "ok",
    "message": "",
    "data": {
        "0": 1009,
        "1": 0,
        "2": 1007,
        "3": 0,
        "4": 1011,
        "5": 0,
        "6": 0,
        "7": 1009,
        "8": 0,
        "9": 1007
    }
}

Fan Set RPM - /api/v0/fan/{fan}/rpm?value={rpm}

Use this function to set fan number {fan} to RPM value of {rpm}.

Note

Fan index must be a value from 0-9

RPM value must be within [500-9000] range.

Example: Set fan #1 to 1200 PRM:

GET - http://localhost:3000/api/v0/fan/1/rpm?value=1200

Response is a JSON object

{
    "status": "ok",
    "message": "Update queued. Fan:1 RPM:1200",
    "data": null
}

Fan Set PWM - /api/v0/fan/{fan}/set?value={pwm}

Use this function to set PWM of fan number {fan} to {pwm} percent.

Note

Fan index must be a value from 0-9

RPM value must be within [0-100] range. Where 0 means off (or lowest speed possible) and 100 means fully on.

Example: Set fan #1 to 60% PMW:

GET - http://localhost:3000/api/v0/fan/1/set?value=60

Response is a JSON object

{
    "status": "ok",
    "message": "Update queued. Fan:1 PWM:60",
    "data": null
}

Fan Profiles List - /api/v0/profiles/list

Use this function to retrieve a list of all the fan profiles that are available.

New fan profiles can be created through the GUI (recommened) or via API.

Example: Retrieve available fan profiles

GET - http://localhost:3000/api/v0/profiles/list

Response is a JSON object

{
    "status": "ok",
    "message": "There are 3 FAN profiles available.",
    "data": [
        {
            "type": "rpm",
            "values": [
                1000,
                1000,
                1000,
                1000,
                1000,
                1000,
                1000,
                1000,
                1000,
                1000
            ],
            "name": "1000 RPM"
        },
        {
            "type": "PWM",
            "values": [
                100,
                100,
                100,
                100,
                100,
                100,
                100,
                100,
                100,
                100
            ],
            "name": "MadMax"
        },
        {
            "type": "RPM",
            "values": [
                1200,
                1200,
                1200,
                1200,
                1200,
                1200,
                1200,
                1200,
                1200,
                1200
            ],
            "name": "1200RPM"
        }
    ]
}

Above is an example response containing available fan profiles. The server has 3 fan profiles that have been previously defined.

Each profile has name, type and values keys.

name key is the name that has been given to this profile and is used to uniquely identify it. There can not be two profiles with the same name. This also allows us to easily overwrite/update profiles by specifying the same name.

type indicates if the values in the profile are to be treated as RPM values or PWM. Given that lowest RPM is 500RPM and highest PWM is 100%, we can easily distinguish between RPM/PWM profile so this key is more for quality of life and potentially catching typos and edge cases (ie. During profile creation setting RPM to 70 instead of 700).

values is an array of exactly 10 elements each corresponding to fans 1-10. These values will be assigned to each fan and be used as RPM/PWM value depending on type.

How are profiles stored?

All fan profiles are stored as plain-text inside config.yaml file.
If you directly add/remove/modify a profile inside config.yaml file, you will have to restart the server app in order for changes to take effect. You can also easily create/update/remove profiles via the provided GUI app.

By backing up your config.yaml you will also back up all of your fan profiles.

Fan Profile Apply - /api/v0/profiles/set?name={profile_name}

Use this function to apply a {profile_name} fan profile. This profile has to be created first (either through GUI (recommended) or via API).

Profile names

It is recommended that you limit you profile names to 'standard' ASCII characters and properly encode any spaces, dashes and any other special characters.

Example: Apply a fan profile named 1000RPM

GET - http://localhost:3000/api/v0/profiles/set?name=?value=1000RPM

Response is a JSON object

{
    "status": "ok",
    "message": "Profile `1000RPM` activated. Fan1=1000 RPM Fan2=1000 RPM Fan3=1000 RPM Fan4=1000 RPM Fan5=1000 RPM Fan6=1000 RPM Fan7=1000 RPM Fan8=1000 RPM Fan9=1000 RPM Fan10=1000 RPM.",
    "data": null
}

Get System Information - /api/v0/info

Use this function to get information about the OpenFAN hardware, firmware and software version.

This function can be used to identify

  • which hardware OpenFAN is running on
  • what is the hardware architecture
  • what is the firmware version currently running on the device
  • what is the protocol version used for communication

It will also provide software information like release date and version.

Example: Get system information

GET - http://localhost:3000/api/v0/info

Response is a JSON object

{
    "status": "ok",
    "message": "System information",
    "data": {
        "hardware": {
                    "HW_REV":"03",
                     "MCU":"PICO2040",
                     "USB":"NATIVE",
                     "FAN_CHANNELS_TOTAL":"10",
                     "FAN_CHANNELS_ARCH":"5+5",
                     "FAN_CHANNELS_DRIVER":"EMC2305"
                 },

        "firmware": {
                    "FW_REV":"01",
                    "PROTOCOL_VERSION":"01"
                 },

        "software": {
                    "Version": "0.1",
                    "Build":"2023-09-29"
                }
    }
}